SendGrid + OpenClaw

How to connect SendGrid to OpenClaw

Connect SendGrid to OpenClaw through Agent200's MCP server: managed OAuth, ready-made tools and one API key.

On this page
  1. Overview
  2. Before you start
  3. Setup steps
  4. Test your connection
  5. Instructions for AI agents
  6. SendGrid tools
  7. How it works
  8. Troubleshooting

Overview

This guide connects SendGrid to OpenClaw through Agent200's MCP server. When you finish, OpenClaw can search, read and act in SendGrid with the tools Agent200 provides, whenever a request needs them.

You add one MCP server to OpenClaw with your Agent200 API key. Your SendGrid account is connected through managed OAuth: you approve access once on SendGrid's own page, and Agent200 keeps the connection working.

Connector
SendGrid
Works with
OpenClaw ยท Agent app, through MCP
Authentication
Managed OAuth, per end user
Tools
9 tools
MCP server
https://api.agent200.com/mcp/

Before you start

  • An Agent200 API key. Create one on the API keys page of the dashboard.
  • SendGrid enabled for your project. In the dashboard's Connectors settings, with the endpoints and scopes your agent needs.
  • An end user with a SendGrid account. They approve access once, on SendGrid's own page.
  • OpenClaw, with custom MCP servers allowed. OpenClaw is open source and self-hosted: anyone running it can add MCP servers, from the CLI, the config file or the Control UI.

Connect SendGrid to OpenClaw

  1. 1

    Step 1: Create your Agent200 API key

    Open the API keys page in the Agent200 dashboard and choose Create an API key. You add it to OpenClaw in the next step, as "Authorization: Bearer <your key>". One key covers SendGrid and every other connector enabled for your project. Keep it out of chats and source control.

  2. 2

    Step 2: Store your key in ~/.openclaw/.env

    OpenClaw fills ${AGENT200_API_KEY} in its config from ~/.openclaw/.env, so the key never sits in the config itself.

    ~/.openclaw/.env
    MCP: OpenClaw key in ~/.openclaw/.env
    AGENT200_API_KEY=your-agent200-api-key
  3. 3

    Step 3: Save the server

    openclaw mcp set takes one JSON object. Always set the transport to streamable-http: without it OpenClaw uses SSE. Keep the single quotes so your shell leaves ${AGENT200_API_KEY} for OpenClaw. In the Control UI, add it under Settings > MCP, then put the header in the config editor on the same page.

    Terminal
    MCP: OpenClaw save the server from the CLI
    openclaw mcp set agent200 '{"url":"https://api.agent200.com/mcp/","transport":"streamable-http","headers":{"Authorization":"Bearer ${AGENT200_API_KEY}"}}'
  4. 4

    Step 4: Probe the server

    Open a live connection and list the tools Agent200 offers. If a Gateway runs elsewhere, reload or restart it.

    Terminal
    MCP: OpenClaw probe the server
    openclaw mcp doctor agent200 --probe
    openclaw mcp status --verbose
  5. 5

    Step 5: Connect your SendGrid account

    The first time you ask OpenClaw for something in SendGrid, Agent200 returns an authorization link. Open it and approve access on SendGrid's own page. Agent200 stores the connection and keeps it working; your password never reaches OpenClaw or Agent200.

Test your connection

Run one request to check everything is wired up.

Ask

How did last week's emails perform?

What should come back

  • An answer built from your own SendGrid data.
  • Behind the scenes, OpenClaw calls an Agent200 tool for SendGrid, such as sendgrid_search_contacts.

If OpenClaw shows an authorization link instead, you have not connected SendGrid yet: open it, approve access, then ask again.

Get your API key

Create a key in the Agent200 dashboard. It reaches SendGrid and every other connector enabled for your project.

Read the SDK docs

Instructions for AI agents

Using a coding agent? Paste this brief into it, or give it the address of this page. It lists what to do, in order, to connect SendGrid to OpenClaw.

Agent brief
Goal: connect SendGrid to OpenClaw with Agent200, through its MCP server.
Guide: https://www.agent200.com/tools/sendgrid/framework/openclaw/

1. The user needs an Agent200 API key. If they have none, send them to https://agent200.com/platform/apikeys/ to choose "Create an API key". They paste it into OpenClaw's settings themselves: never ask for it in chat and never write it into files you share.
2. Make sure SendGrid is enabled for their project in the Agent200 dashboard (Connectors), with the tools the task needs.
3. Add Agent200's MCP server to OpenClaw: URL https://api.agent200.com/mcp/, transport streamable HTTP, header "Authorization: Bearer <the user's Agent200 API key>". Follow the setup steps on the guide page for OpenClaw's exact menus or commands.
4. The first SendGrid request returns an authorization link if the user has not connected SendGrid yet: show it to them and continue once they have approved access on SendGrid's own page.
5. Check it works with this request: "How did last week's emails perform?"
   What should come back:
   - An answer built from your own SendGrid data.
   - Behind the scenes, OpenClaw calls an Agent200 tool for SendGrid, such as `sendgrid_search_contacts`.
6. If a tool is missing or a call is refused, check the project's Connectors settings in the dashboard and the access the user granted in SendGrid, then retry.

The whole guide is also available as Markdown, for agents and LLMs: /tools/sendgrid/framework/openclaw.md

SendGrid tools OpenClaw can call

  • Send an email

    Write
    sendgrid_send_email

    Send an email, optionally from a dynamic template.

  • Add or update contacts

    Write
    sendgrid_upsert_contacts

    Add contacts or update existing ones, optionally into a list.

  • Search contacts

    Read
    sendgrid_search_contacts

    Find contacts that match a query.

  • List contact lists

    Read
    sendgrid_list_lists

    List the account's contact lists.

  • List templates

    Read
    sendgrid_list_templates

    List the account's email templates.

  • Create a campaign

    Write
    sendgrid_create_single_send

    Create a Single Send for chosen lists or segments.

  • Schedule a campaign

    Write
    sendgrid_schedule_single_send

    Send a Single Send now or at a set time.

  • Get email stats

    Read
    sendgrid_get_stats

    Read delivery, open and click totals for a date range.

  • List bounces

    Read
    sendgrid_list_bounces

    List addresses that bounced.

How it works

  1. 01

    You ask OpenClaw

    In your own words, for something in SendGrid.

  2. 02

    OpenClaw picks a tool

    It sees the SendGrid tools on the Agent200 MCP server and calls the one the request needs.

  3. 03

    Agent200 runs the call

    With your own SendGrid connection, within the tools and scopes your project allows.

  4. 04

    OpenClaw answers

    It gets the result back from the MCP server and uses it in its reply or its next step.

Each user's own connection. Connections belong to individual end users. A request for one user never reaches another user's SendGrid account.

Permissions at every level. Your project settings decide what the agent may request, the end user decides what they authorize, and SendGrid enforces what its API grants.

Troubleshooting

The connection fails right after adding the server

Check the transport is streamable-http: when it is missing OpenClaw uses SSE, which Agent200 does not serve.

Authentication refused (401)

Check headers.Authorization is Bearer ${AGENT200_API_KEY} and that AGENT200_API_KEY is set for the process running OpenClaw.

The doctor warns about a literal header value

Replace the pasted key with ${AGENT200_API_KEY} and move the key to ~/.openclaw/.env.

Changes do not reach your agent

A Gateway or agent running elsewhere needs its own reload or a restart.

OpenClaw shows a SendGrid authorization link

You have not connected SendGrid yet, or the connection needs to be approved again. Open the link, approve access on SendGrid's own page, then ask OpenClaw again.

A tool call is refused or returns less than expected

Agent200 runs only what your project allows. Check that SendGrid and the tools you need are enabled in the dashboard's Connectors settings, and that you granted SendGrid the access the task needs.

The API key was pasted into a chat or committed

Create a new key on the API keys page, replace it in OpenClaw's MCP settings, and stop using the old one. Paste the key only into OpenClaw's settings, never into a chat.

Use SendGrid with another framework

200 OK

SendGrid, connected to OpenClaw.
One SDK. One API key.

Agent200 handles the OAuth, the tokens and every tool call. You keep your agent, your model and your code.

Book a demo.
See it in action.

Tell us who you are, then pick a time for a 1:1 session with an expert from our team.

We use your details only to email you about Agent200. See the Privacy Policy.

Pick a time. We'll take it from there.

A 1:1 session with an expert from our team, about what you are building.

Open in Calendly (opens in a new tab)