Resend + Claude Code
Build a Resend agent with Claude Code
Have Claude Code build a Resend agent with the Agent200 SDK: managed OAuth, ready-made tools and one API key.
On this page
Overview
This guide has Claude Code build a Resend agent with the Agent200 SDK, in your own project. When you finish, your agent can call the Resend tools for each of your users.
Claude Code writes the code from the steps below; Agent200 runs the Resend calls with each user's own connection and handles the OAuth flow and the tokens. You do not build or maintain a Resend integration.
- Connector
- Resend
- Works with
- Claude Code ยท Coding agent, with the SDK
- Authentication
- Managed OAuth, per end user
- You need
- An Agent200 API key
- Tools
- 8 tools
- Model in examples
openai/gpt-5.6-sol
Before you start
- An Agent200 API key. Create one on the API keys page of the dashboard.
- Resend enabled for your project. In the dashboard's Connectors settings, with the endpoints and scopes your agent needs.
- An end user with a Resend account. They approve access once, on Resend's own page.
- Claude Code in your project. It writes the code with the Agent200 SDK; you review it.
Connect Resend to Claude Code
-
1
Step 1: Create your Agent200 API key
Open the API keys page in the Agent200 dashboard and choose Create an API key. Copy the key and store it as an environment variable, AGENT200_API_KEY, or in your secrets manager. One key covers Resend and every other connector and model enabled for your project. Keep it out of chats, prompts and source control.
.envConceptual exampleStore the Agent200 API key as an environment variable # Keep the key out of your code, prompts and chats. export AGENT200_API_KEY="paste-your-key-here" -
2
Step 2: Give this guide to Claude Code
Start Claude Code in your project and paste the agent brief from this page, or give it the address of this guide's Markdown version. Claude Code follows the steps below in order: the SDK, the Resend connection and the first request. Review the code it writes before you run it.
-
3
Step 3: Set up the Agent200 SDK
Add the SDK to your project and create a client with the key from the environment.
agent.jsConceptual exampleSet up the SDK with the Agent200 API key // One Agent200 API key covers every connector enabled for the project. const agent200 = new Agent200({ apiKey: process.env.AGENT200_API_KEY, }); -
4
Step 4: Let your user connect Resend
Each end user authorizes their own Resend account once, through managed OAuth. If the user has not connected yet, Agent200 returns an authorization link: show it to them, and they approve access on Resend's own page. Agent200 handles the callback, stores the tokens and refreshes them.
connect.jsConceptual exampleLet an end user connect their account (managed OAuth) // Each end user authorizes their own Resend account, once. const connection = await agent200 .user("user_123") .connect("resend"); if (connection.authorizationUrl) { // Show this link to your user; Agent200 handles the rest. console.log(connection.authorizationUrl); } -
5
Step 5: Run with the Resend tools
Name the user, the model and Resend in the tools. The model decides when a Resend tool is needed, and Agent200 executes the call with the user's own connection.
run.jsConceptual exampleRun a request with the connector's tools const result = await agent200 .user("user_123") .run({ model: "openai/gpt-5.6-sol", input: "Send the welcome email to the three new signups", tools: ["resend"], }); console.log(result.output);
Test your connection
Run one request to check everything is wired up.
Ask
Send the welcome email to the three new signups
What should come back
-
An answer in
result.output, built from the user's own Resend data. -
Behind the scenes, the model calls a Resend tool, such as
resend_get_email, and Agent200 runs it.
If Agent200 returns an authorization link instead, the user has not connected Resend yet. Go back to the connect step.
Get your API key
Create a key in the Agent200 dashboard. It reaches Resend and every other connector enabled for your project.
Instructions for AI agents
Using a coding agent? Paste this brief into it, or give it the address of this page. It lists what to do, in order, to connect Resend to Claude Code.
Goal: connect Resend to Claude Code with Agent200. Guide: https://www.agent200.com/tools/resend/framework/claude-code/ 1. Get an Agent200 API key. If the developer has none, send them to https://agent200.com/platform/apikeys/ and ask them to choose "Create an API key". Read the key from the AGENT200_API_KEY environment variable. Never ask for it in chat, and never write it into code, prompts or logs. 2. Make sure Resend is enabled for the project in the Agent200 dashboard (Connectors), with the endpoints and scopes the task needs. 3. Add the Agent200 SDK to the project and create a client with that key. 4. Give every request a stable id for the end user. Agent200 uses only that user's own connections. 5. Connect the user's Resend account through Agent200. If Agent200 returns an authorization link, show it to the user and continue once they have approved access on Resend. 6. Run requests through Agent200 with a model (for example openai/gpt-5.6-sol) and "resend" in the tools. The model decides when a Resend tool is needed; Agent200 executes the call. 7. Check it works with this request: "Send the welcome email to the three new signups" What should come back: - An answer in `result.output`, built from the user's own Resend data. - Behind the scenes, the model calls a Resend tool, such as `resend_get_email`, and Agent200 runs it. 8. If a tool is missing or a call is refused, check the project's Connectors settings in the dashboard and the access the user granted in Resend, then retry. The code on the guide page is a conceptual example of the SDK. SDK reference: https://docs.igpt.ai/
The whole guide is also available as Markdown, for agents and LLMs: /tools/resend/framework/claude-code.md
Resend tools Claude Code can call
-
Send an email
Writeresend_send_emailSend an email from a verified domain, now or at a set time.
-
Send a batch
Writeresend_send_batchSend several emails in one request.
-
Get an email
Readresend_get_emailRead a sent email and its latest delivery status.
-
Cancel a scheduled email
Writeresend_cancel_emailCancel an email scheduled for later.
-
List domains
Readresend_list_domainsList the sending domains and their verification status.
-
Add a contact
Writeresend_create_contactAdd a contact to the account.
-
Create a broadcast
Writeresend_create_broadcastCreate a broadcast email for a group of contacts.
-
Send a broadcast
Writeresend_send_broadcastSend a broadcast now or schedule it.
No tool matches that search.
How it works
-
01
Your app sends the request
It calls Agent200 with the model, instructions, the input, the end user's id and the Resend tools.
-
02
The model picks a tool
The model decides whether a Resend tool is needed, and with which arguments.
-
03
Agent200 runs the call
It uses that user's own Resend connection, within the endpoints and scopes your project allows, and returns the result to the model.
-
04
Your app gets the result
Agent200 returns the completed result. Your app decides when the agent runs and what happens next.
Each user's own connection. Connections belong to individual end users. A request for one user never reaches another user's Resend account.
Permissions at every level. Your project settings decide what the agent may request, the end user decides what they authorize, and Resend enforces what its API grants.
Troubleshooting
The request says Resend authorization is required
The end user has not connected Resend yet, or the connection needs to be approved again. Agent200 returns an authorization link: show it to the user, let them approve access on Resend's own page, then run the request again.
Claude Code does not use the Resend tools
Check that Resend is enabled for your project in the dashboard's Connectors settings and that it is in the tools you send with the request. Naming Resend in the request, or in the instructions, also helps the model choose the right tool.
A tool call is refused or returns less than expected
Agent200 runs only what your project allows (services, endpoints and scopes), and Resend returns only what the end user authorized. Widen the endpoints or scopes in the dashboard if the agent needs more, then ask the user to connect Resend again so they can approve the new access.
The results come from the wrong account
Every request names an end user (user_123 in the examples). Pass the id of the person your agent is working for: Agent200 then uses only that user's Resend connection, never another user's.
The API key was pasted into a chat or committed
Create a new key on the API keys page, update AGENT200_API_KEY wherever your app reads it, and stop using the old one. Keep keys in environment variables or a secrets manager, never in prompts, chats or source control.