# How to connect Microsoft Teams to Claude

> Connect Microsoft Teams to Claude through Agent200's MCP server: managed OAuth, ready-made tools and one API key.

- Page: https://www.agent200.com/tools/microsoft-teams/framework/claude/
- Connector: [Microsoft Teams](https://www.agent200.com/tools/microsoft-teams.md)
- Framework: Claude
- Updated: 2026-11-15

## Instructions for AI agents

Goal: connect Microsoft Teams to Claude with Agent200, through its MCP server.
Guide: https://www.agent200.com/tools/microsoft-teams/framework/claude/

1. The user needs an Agent200 API key. If they have none, send them to https://agent200.com/platform/apikeys/ to choose "Create an API key". They paste it into Claude's settings themselves: never ask for it in chat and never write it into files you share.
2. Make sure Microsoft Teams is enabled for their project in the Agent200 dashboard (Connectors), with the tools the task needs.
3. Add Agent200's MCP server to Claude: URL https://api.agent200.com/mcp/, transport streamable HTTP, header "Authorization: Bearer <the user's Agent200 API key>". Follow the setup steps on the guide page for Claude's exact menus or commands.
4. The first Microsoft Teams request returns an authorization link if the user has not connected Microsoft Teams yet: show it to them and continue once they have approved access on Microsoft Teams's own page.
5. Check it works with this request: "What did the design channel discuss today?"
   What should come back:
   - An answer built from your own Microsoft Teams data.
   - Behind the scenes, Claude calls an Agent200 tool for Microsoft Teams, such as `microsoft_teams_list_teams`.
6. If a tool is missing or a call is refused, check the project's Connectors settings in the dashboard and the access the user granted in Microsoft Teams, then retry.

## Overview

This guide connects Microsoft Teams to Claude through Agent200's MCP server. When you finish, Claude can search, read and act in Microsoft Teams with the tools Agent200 provides, whenever a request needs them.

You add one MCP server to Claude with your Agent200 API key. Your Microsoft Teams account is connected through managed OAuth: you approve access once on Microsoft Teams's own page, and Agent200 keeps the connection working.

- **Connector:** [Microsoft Teams](https://www.agent200.com/tools/microsoft-teams/)
- **Works with:** Claude · Agent app, through MCP
- **Authentication:** Managed OAuth, per end user
- **You need:** [An Agent200 API key](https://agent200.com/platform/apikeys/)
- **Tools:** [9 tools](https://www.agent200.com/tools/microsoft-teams/framework/claude/#tools)
- **MCP server:** `https://api.agent200.com/mcp/`

## Before you start

- **An Agent200 API key.** Create one on the [API keys page](https://agent200.com/platform/apikeys/) of the dashboard.
- **Microsoft Teams enabled for your project.** In the dashboard's Connectors settings, with the endpoints and scopes your agent needs.
- **An end user with a Microsoft Teams account.** They approve access once, on Microsoft Teams's own page.
- **Claude, with custom MCP servers allowed.** Custom connectors are on every Claude plan (Free: one). Sending an API key uses the Request headers option, a beta that only some accounts have; on Team and Enterprise an Owner adds the connector for everyone.

## Connect Microsoft Teams to Claude

### Step 1: Create your Agent200 API key

Open the API keys page in the Agent200 dashboard and choose Create an API key. You add it to Claude in the next step, as "Authorization: Bearer <your key>". One key covers Microsoft Teams and every other connector enabled for your project. Keep it out of chats and source control.

Create an API key: https://agent200.com/platform/apikeys/

### Step 2: Open Connectors in Claude

On a Free, Pro, Max or Ultra plan, go to **Customize > Connectors**. On Team or Enterprise, an Owner goes to **Organization settings > Connectors**; members then find the connector under Customize > Connectors.

### Step 3: Add a custom connector

Select **Add**, then **Add custom connector**. Enter a name, Agent200, and the remote MCP server URL, then choose **Continue**.

### Step 4: Send your key as a request header

Under Authentication choose **No sign-in**. Open **Request headers**, pick `authorization`, enter `Bearer` followed by a space and your key, mark it Required and choose **Add**. Claude sends the value exactly as typed.

File `Add custom connector`:

```text
Remote MCP server URL:  https://api.agent200.com/mcp/
Authentication:         No sign-in
Request header name:    authorization
Value:                  Bearer YOUR_AGENT200_API_KEY
```

### Step 5: Turn it on in a chat

In a chat, select **+ > Connectors** and turn Agent200 on. Ask Claude to list the Agent200 tools to check the connection; Claude asks before a tool runs the first time.

### Step 6: Connect your Microsoft Teams account

The first time you ask Claude for something in Microsoft Teams, Agent200 returns an authorization link. Open it and approve access on Microsoft Teams's own page. Agent200 stores the connection and keeps it working; your password never reaches Claude or Agent200.

## Test your connection

Ask: "What did the design channel discuss today?"

What should come back:

- An answer built from your own Microsoft Teams data.
- Behind the scenes, Claude calls an Agent200 tool for Microsoft Teams, such as `microsoft_teams_list_teams`.

If Claude shows an authorization link instead, you have not connected Microsoft Teams yet: open it, approve access, then ask again.

## Microsoft Teams tools Claude can call

- **List teams** (`microsoft_teams_list_teams`, read): List the teams the user is a member of.
- **List channels** (`microsoft_teams_list_channels`, read): List the channels in a team.
- **Read a channel** (`microsoft_teams_get_channel_messages`, read): Read recent messages in a channel.
- **Post in a channel** (`microsoft_teams_send_channel_message`, write): Post a new message in a channel.
- **Reply to a message** (`microsoft_teams_reply_message`, write): Reply in the thread of a channel message.
- **List chats** (`microsoft_teams_list_chats`, read): List the user's one-on-one and group chats.
- **Read a chat** (`microsoft_teams_get_chat_messages`, read): Read recent messages in a chat.
- **Send a chat message** (`microsoft_teams_send_chat_message`, write): Send a message in a one-on-one or group chat.
- **Create a meeting** (`microsoft_teams_create_meeting`, write): Create an online meeting and get its join link.

## How it works

1. **You ask Claude.** In your own words, for something in Microsoft Teams.
2. **Claude picks a tool.** It sees the Microsoft Teams tools on the Agent200 MCP server and calls the one the request needs.
3. **Agent200 runs the call.** With your own Microsoft Teams connection, within the tools and scopes your project allows.
4. **Claude answers.** It gets the result back from the MCP server and uses it in its reply or its next step.

**Each user's own connection.** Connections belong to individual end users. A request for one user never reaches another user's Microsoft Teams account.

**Permissions at every level.** Your project settings decide what the agent may request, the end user decides what they authorize, and Microsoft Teams enforces what its API grants.

## Troubleshooting

### There is no Request headers section

Request headers are a Claude beta that only some accounts have. Without it, Claude cannot send an API key to a custom connector: use Claude Code, or the Agent200 SDK in your own agent.

### Claude cannot reach the server

Check the header value is `Bearer`, a space, then your key, and that the URL is exactly the Agent200 MCP server address.

### A Team or Enterprise member cannot add the connector

Only an Owner adds custom connectors, in Organization settings > Connectors. Members then connect it under Customize > Connectors.

### You created a new API key

Claude does not let you edit a connector’s authentication. Remove the Agent200 connector and add it again with the new key.

### Claude does not use the Microsoft Teams tools

Open + > Connectors in that chat and check Agent200 is on, and that no tool is set to Blocked under Customize > Connectors. Naming Microsoft Teams in the request also helps.

### Claude shows a Microsoft Teams authorization link

You have not connected Microsoft Teams yet, or the connection needs to be approved again. Open the link, approve access on Microsoft Teams's own page, then ask Claude again.

### A tool call is refused or returns less than expected

Agent200 runs only what your project allows. Check that Microsoft Teams and the tools you need are enabled in the dashboard's Connectors settings, and that you granted Microsoft Teams the access the task needs.

### The API key was pasted into a chat or committed

Create a new key on the [API keys page](https://agent200.com/platform/apikeys/), replace it in Claude's MCP settings, and stop using the old one. Paste the key only into Claude's settings, never into a chat.

## Use Microsoft Teams with another framework

- [Microsoft Teams + ChatGPT](https://www.agent200.com/tools/microsoft-teams/framework/chatgpt.md)
- [Microsoft Teams + Claude Code](https://www.agent200.com/tools/microsoft-teams/framework/claude-code.md)
- [Microsoft Teams + Muse](https://www.agent200.com/tools/microsoft-teams/framework/muse.md)
- [Microsoft Teams + Grok Bot](https://www.agent200.com/tools/microsoft-teams/framework/grok-bot.md)
- [Microsoft Teams + OpenAI Dots](https://www.agent200.com/tools/microsoft-teams/framework/openai-dots.md)
- [Microsoft Teams + Claude Duet](https://www.agent200.com/tools/microsoft-teams/framework/claude-duet.md)
- [Microsoft Teams + Hermes Agent](https://www.agent200.com/tools/microsoft-teams/framework/hermes-agent.md)
- [Microsoft Teams + OpenClaw](https://www.agent200.com/tools/microsoft-teams/framework/openclaw.md)

---

Agent200: https://www.agent200.com/ · API keys: https://agent200.com/platform/apikeys/ · Docs: https://docs.igpt.ai/
