Adobe + Claude Code

Build a Adobe agent with Claude Code

Have Claude Code build a Adobe agent with the Agent200 SDK: managed OAuth, ready-made tools and one API key.

On this page
  1. Overview
  2. Before you start
  3. Setup steps
  4. Test your connection
  5. Instructions for AI agents
  6. Adobe tools
  7. How it works
  8. Troubleshooting

Overview

This guide has Claude Code build a Adobe agent with the Agent200 SDK, in your own project. When you finish, your agent can call the Adobe tools for each of your users.

Claude Code writes the code from the steps below; Agent200 runs the Adobe calls with each user's own connection and handles the OAuth flow and the tokens. You do not build or maintain a Adobe integration.

Connector
Adobe
Works with
Claude Code ยท Coding agent, with the SDK
Authentication
Managed OAuth, per end user
Tools
8 tools
Model in examples
openai/gpt-5.6-sol

Before you start

  • An Agent200 API key. Create one on the API keys page of the dashboard.
  • Adobe enabled for your project. In the dashboard's Connectors settings, with the endpoints and scopes your agent needs.
  • An end user with a Adobe account. They approve access once, on Adobe's own page.
  • Claude Code in your project. It writes the code with the Agent200 SDK; you review it.

Connect Adobe to Claude Code

  1. 1

    Step 1: Create your Agent200 API key

    Open the API keys page in the Agent200 dashboard and choose Create an API key. Copy the key and store it as an environment variable, AGENT200_API_KEY, or in your secrets manager. One key covers Adobe and every other connector and model enabled for your project. Keep it out of chats, prompts and source control.

    .env
    Conceptual example
    Store the Agent200 API key as an environment variable
    # Keep the key out of your code, prompts and chats.
    export AGENT200_API_KEY="paste-your-key-here"
  2. 2

    Step 2: Give this guide to Claude Code

    Start Claude Code in your project and paste the agent brief from this page, or give it the address of this guide's Markdown version. Claude Code follows the steps below in order: the SDK, the Adobe connection and the first request. Review the code it writes before you run it.

  3. 3

    Step 3: Set up the Agent200 SDK

    Add the SDK to your project and create a client with the key from the environment.

    agent.js
    Conceptual example
    Set up the SDK with the Agent200 API key
    // One Agent200 API key covers every connector enabled for the project.
    const agent200 = new Agent200({
      apiKey: process.env.AGENT200_API_KEY,
    });
  4. 4

    Step 4: Let your user connect Adobe

    Each end user authorizes their own Adobe account once, through managed OAuth. If the user has not connected yet, Agent200 returns an authorization link: show it to them, and they approve access on Adobe's own page. Agent200 handles the callback, stores the tokens and refreshes them.

    connect.js
    Conceptual example
    Let an end user connect their account (managed OAuth)
    // Each end user authorizes their own Adobe account, once.
    const connection = await agent200
      .user("user_123")
      .connect("adobe");
    
    if (connection.authorizationUrl) {
      // Show this link to your user; Agent200 handles the rest.
      console.log(connection.authorizationUrl);
    }
  5. 5

    Step 5: Run with the Adobe tools

    Name the user, the model and Adobe in the tools. The model decides when a Adobe tool is needed, and Agent200 executes the call with the user's own connection.

    run.js
    Conceptual example
    Run a request with the connector's tools
    const result = await agent200
      .user("user_123")
      .run({
        model: "openai/gpt-5.6-sol",
        input: "Send the NDA to jane@acme.com for signature",
        tools: ["adobe"],
      });
    
    console.log(result.output);

Test your connection

Run one request to check everything is wired up.

Ask

Send the NDA to jane@acme.com for signature

What should come back

  • An answer in result.output, built from the user's own Adobe data.
  • Behind the scenes, the model calls a Adobe tool, such as adobe_list_agreements, and Agent200 runs it.

If Agent200 returns an authorization link instead, the user has not connected Adobe yet. Go back to the connect step.

Get your API key

Create a key in the Agent200 dashboard. It reaches Adobe and every other connector enabled for your project.

Read the SDK docs

Instructions for AI agents

Using a coding agent? Paste this brief into it, or give it the address of this page. It lists what to do, in order, to connect Adobe to Claude Code.

Agent brief
Goal: connect Adobe to Claude Code with Agent200.
Guide: https://www.agent200.com/tools/adobe/framework/claude-code/

1. Get an Agent200 API key. If the developer has none, send them to https://agent200.com/platform/apikeys/ and ask them to choose "Create an API key". Read the key from the AGENT200_API_KEY environment variable. Never ask for it in chat, and never write it into code, prompts or logs.
2. Make sure Adobe is enabled for the project in the Agent200 dashboard (Connectors), with the endpoints and scopes the task needs.
3. Add the Agent200 SDK to the project and create a client with that key.
4. Give every request a stable id for the end user. Agent200 uses only that user's own connections.
5. Connect the user's Adobe account through Agent200. If Agent200 returns an authorization link, show it to the user and continue once they have approved access on Adobe.
6. Run requests through Agent200 with a model (for example openai/gpt-5.6-sol) and "adobe" in the tools. The model decides when a Adobe tool is needed; Agent200 executes the call.
7. Check it works with this request: "Send the NDA to jane@acme.com for signature"
   What should come back:
   - An answer in `result.output`, built from the user's own Adobe data.
   - Behind the scenes, the model calls a Adobe tool, such as `adobe_list_agreements`, and Agent200 runs it.
8. If a tool is missing or a call is refused, check the project's Connectors settings in the dashboard and the access the user granted in Adobe, then retry.

The code on the guide page is a conceptual example of the SDK. SDK reference: https://docs.igpt.ai/

The whole guide is also available as Markdown, for agents and LLMs: /tools/adobe/framework/claude-code.md

Adobe tools Claude Code can call

  • Upload a document

    Write
    adobe_upload_document

    Upload a file to use in an agreement.

  • Send for signature

    Write
    adobe_send_agreement

    Send a document to one or more people to sign.

  • List agreements

    Read
    adobe_list_agreements

    List the user's agreements and their status.

  • Get an agreement

    Read
    adobe_get_agreement

    Read an agreement's status and who has or has not signed.

  • Download a signed document

    Read
    adobe_download_agreement

    Download an agreement's document as a PDF.

  • Send a reminder

    Write
    adobe_send_reminder

    Remind the people who still have to sign.

  • Cancel an agreement

    Write
    adobe_cancel_agreement

    Cancel an agreement that is out for signature.

  • List templates

    Read
    adobe_list_templates

    List the reusable documents in the user's library.

How it works

  1. 01

    Your app sends the request

    It calls Agent200 with the model, instructions, the input, the end user's id and the Adobe tools.

  2. 02

    The model picks a tool

    The model decides whether a Adobe tool is needed, and with which arguments.

  3. 03

    Agent200 runs the call

    It uses that user's own Adobe connection, within the endpoints and scopes your project allows, and returns the result to the model.

  4. 04

    Your app gets the result

    Agent200 returns the completed result. Your app decides when the agent runs and what happens next.

Each user's own connection. Connections belong to individual end users. A request for one user never reaches another user's Adobe account.

Permissions at every level. Your project settings decide what the agent may request, the end user decides what they authorize, and Adobe enforces what its API grants.

Troubleshooting

The request says Adobe authorization is required

The end user has not connected Adobe yet, or the connection needs to be approved again. Agent200 returns an authorization link: show it to the user, let them approve access on Adobe's own page, then run the request again.

Claude Code does not use the Adobe tools

Check that Adobe is enabled for your project in the dashboard's Connectors settings and that it is in the tools you send with the request. Naming Adobe in the request, or in the instructions, also helps the model choose the right tool.

A tool call is refused or returns less than expected

Agent200 runs only what your project allows (services, endpoints and scopes), and Adobe returns only what the end user authorized. Widen the endpoints or scopes in the dashboard if the agent needs more, then ask the user to connect Adobe again so they can approve the new access.

The results come from the wrong account

Every request names an end user (user_123 in the examples). Pass the id of the person your agent is working for: Agent200 then uses only that user's Adobe connection, never another user's.

The API key was pasted into a chat or committed

Create a new key on the API keys page, update AGENT200_API_KEY wherever your app reads it, and stop using the old one. Keep keys in environment variables or a secrets manager, never in prompts, chats or source control.

Use Adobe with another framework

200 OK

Adobe, connected to Claude Code.
One SDK. One API key.

Agent200 handles the OAuth, the tokens and every tool call. You keep your agent, your model and your code.

Book a demo.
See it in action.

Tell us who you are, then pick a time for a 1:1 session with an expert from our team.

We use your details only to email you about Agent200. See the Privacy Policy.

Pick a time. We'll take it from there.

A 1:1 session with an expert from our team, about what you are building.

Open in Calendly (opens in a new tab)