Mem0 + OpenClaw

How to connect Mem0 to OpenClaw

Connect Mem0 to OpenClaw through Agent200's MCP server: no separate key, ready-made tools and one API key.

On this page
  1. Overview
  2. Before you start
  3. Setup steps
  4. Test your connection
  5. Instructions for AI agents
  6. Mem0 tools
  7. How it works
  8. Troubleshooting

Overview

This guide connects Mem0 to OpenClaw through Agent200's MCP server. When you finish, OpenClaw can search, read and act in Mem0 with the tools Agent200 provides, whenever a request needs them.

You add one MCP server to OpenClaw with your Agent200 API key. Mem0 is reached with that key, so there is no separate Mem0 key to manage.

Connector
Mem0
Works with
OpenClaw ยท Agent app, through MCP
Authentication
Your Agent200 API key
Tools
6 tools
MCP server
https://api.agent200.com/mcp/

Before you start

  • An Agent200 API key. Create one on the API keys page of the dashboard.
  • Mem0 enabled for your project. In the dashboard's Connectors settings, with the endpoints and scopes your agent needs.
  • OpenClaw, with custom MCP servers allowed. OpenClaw is open source and self-hosted: anyone running it can add MCP servers, from the CLI, the config file or the Control UI.

Connect Mem0 to OpenClaw

  1. 1

    Step 1: Create your Agent200 API key

    Open the API keys page in the Agent200 dashboard and choose Create an API key. You add it to OpenClaw in the next step, as "Authorization: Bearer <your key>". One key covers Mem0 and every other connector enabled for your project. Keep it out of chats and source control.

  2. 2

    Step 2: Store your key in ~/.openclaw/.env

    OpenClaw fills ${AGENT200_API_KEY} in its config from ~/.openclaw/.env, so the key never sits in the config itself.

    ~/.openclaw/.env
    MCP: OpenClaw key in ~/.openclaw/.env
    AGENT200_API_KEY=your-agent200-api-key
  3. 3

    Step 3: Save the server

    openclaw mcp set takes one JSON object. Always set the transport to streamable-http: without it OpenClaw uses SSE. Keep the single quotes so your shell leaves ${AGENT200_API_KEY} for OpenClaw. In the Control UI, add it under Settings > MCP, then put the header in the config editor on the same page.

    Terminal
    MCP: OpenClaw save the server from the CLI
    openclaw mcp set agent200 '{"url":"https://api.agent200.com/mcp/","transport":"streamable-http","headers":{"Authorization":"Bearer ${AGENT200_API_KEY}"}}'
  4. 4

    Step 4: Probe the server

    Open a live connection and list the tools Agent200 offers. If a Gateway runs elsewhere, reload or restart it.

    Terminal
    MCP: OpenClaw probe the server
    openclaw mcp doctor agent200 --probe
    openclaw mcp status --verbose

Test your connection

Run one request to check everything is wired up.

Ask

What do you know about my travel preferences

What should come back

  • A result from Mem0, returned through your Agent200 API key.
  • Behind the scenes, OpenClaw calls mem0_search_memories.

If a tool is refused, check that Mem0 is switched on for your project in the Agent200 dashboard.

Get your API key

Create a key in the Agent200 dashboard. It reaches Mem0 and every other connector enabled for your project.

Read the SDK docs

Instructions for AI agents

Using a coding agent? Paste this brief into it, or give it the address of this page. It lists what to do, in order, to connect Mem0 to OpenClaw.

Agent brief
Goal: connect Mem0 to OpenClaw with Agent200, through its MCP server.
Guide: https://www.agent200.com/connectors/mem0/framework/openclaw/

1. The user needs an Agent200 API key. If they have none, send them to https://agent200.com/platform/apikeys/ to choose "Create an API key". They paste it into OpenClaw's settings themselves: never ask for it in chat and never write it into files you share.
2. Make sure Mem0 is enabled for their project in the Agent200 dashboard (Connectors), with the tools the task needs.
3. Add Agent200's MCP server to OpenClaw: URL https://api.agent200.com/mcp/, transport streamable HTTP, header "Authorization: Bearer <the user's Agent200 API key>". Follow the setup steps on the guide page for OpenClaw's exact menus or commands.
4. Check it works with this request: "What do you know about my travel preferences"
   What should come back:
   - A result from Mem0, returned through your Agent200 API key.
   - Behind the scenes, OpenClaw calls `mem0_search_memories`.
5. If a tool is missing or a call is refused, check the project's Connectors settings in the dashboard, then retry.

The whole guide is also available as Markdown, for agents and LLMs: /connectors/mem0/framework/openclaw.md

Mem0 tools OpenClaw can call

  • Add a memory

    Write
    mem0_add_memory

    Store new memories from a message or conversation.

  • Search memories

    Read
    mem0_search_memories

    Find the memories most relevant to a query.

  • List memories

    Read
    mem0_list_memories

    List the memories stored for a user.

  • Get a memory

    Read
    mem0_get_memory

    Get a single memory by its ID.

  • Update a memory

    Write
    mem0_update_memory

    Change the text of a memory.

  • Delete a memory

    Write
    mem0_delete_memory

    Delete a memory by its ID.

How it works

  1. 01

    You ask OpenClaw

    In your own words, for something in Mem0.

  2. 02

    OpenClaw picks a tool

    It sees the Mem0 tools on the Agent200 MCP server and calls the one the request needs.

  3. 03

    Agent200 runs the call

    It reaches Mem0 with your Agent200 API key, within the endpoints your project allows.

  4. 04

    OpenClaw answers

    It gets the result back from the MCP server and uses it in its reply or its next step.

Permissions at every level. Your project settings decide which services and endpoints the agent may use.

Troubleshooting

The connection fails right after adding the server

Check the transport is streamable-http: when it is missing OpenClaw uses SSE, which Agent200 does not serve.

Authentication refused (401)

Check headers.Authorization is Bearer ${AGENT200_API_KEY} and that AGENT200_API_KEY is set for the process running OpenClaw.

The doctor warns about a literal header value

Replace the pasted key with ${AGENT200_API_KEY} and move the key to ~/.openclaw/.env.

Changes do not reach your agent

A Gateway or agent running elsewhere needs its own reload or a restart.

A tool call is refused or returns less than expected

Agent200 runs only what your project allows. Check that Mem0 and the tools you need are enabled in the dashboard's Connectors settings.

The API key was pasted into a chat or committed

Create a new key on the API keys page, replace it in OpenClaw's MCP settings, and stop using the old one. Paste the key only into OpenClaw's settings, never into a chat.

Use Mem0 with another framework

200 OK

Mem0, connected to OpenClaw.
One SDK. One API key.

Agent200 handles the OAuth, the tokens and every tool call. You keep your agent, your model and your code.

Book a demo.
See it in action.

Tell us who you are, then pick a time for a 1:1 session with an expert from our team.

We use your details only to email you about Agent200. See the Privacy Policy.

Pick a time. We'll take it from there.

A 1:1 session with an expert from our team, about what you are building.

Open in Calendly (opens in a new tab)